New Samtank SMT chemical tank trailer
SAMSUN/TEKKEKÖY9111 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+90 501 912...
Show
+90 501 912 32 18
7,000 kg
Ukraine, Odessa
Turkey, Osmaniye
Turkey, Osmaniye
Ukraine, Odessa
12,500 kg
Ukraine, Odessa
Turkey, Konya
Turkey, Konya
7,000 kg
Ukraine, Biliaivka
27,000 kg
Turkey, Konya
Turkey, Konya
Austria, Vienna
Ukraine, m.Kyiv
5,890 kg
Poland, Brzeg
Turkey, Konya
7,500 kg
Italy, Ornago
Hungary, Szekszard
Germany, Rheine
31,040 kg
Net weight
6,960 kg
France, Toulouse
Ukraine, Kyievo - Sviatoshynskyi r-on, s.Buzova
Turkey, DILOVASI / KOCAELI
Body : The body sheets are selected as 4.2 mm S235JR in accordance with the material and
manufacturing requirements of the EN 13094:2008 standard and are welded using the robotic MIG welding method.
Dished : The dishes and baffles are designed and manufactured as 5.0 mm S235JR in accordance with
the EN 13094:2008 standard, fully meeting the strength and sealing requirements.
Chassis : The chassis and the entire vehicle structure have received type approval under EU 2018/858
and comply with relevant international standards. They are made of 6.0 mm S355JR, 8.0 mm S355JR, and 10.0 mm
S355JR materials.
Brake System : The braking system is designed and tested in accordance with ECE R13 regulations; it is
equipped with an electronic brake control (EBS) and anti-lock braking system (ABS) to provide high safety and
performance.
Axles : The 3x9 ton axles used in our tanker are sourced from industry-leading brands such as Saf
Holland, BPW, and Sertel, ensuring safe transportation in full compliance with EN 13094:2008 and ADR requirements.
Electrical System : All lighting and signaling systems are selected in accordance with UN ECE R48 regulations.
Tyres and Rims : The tire size used in our tankers is 385/65 R 22.5, and it is available with either aluminum or
steel rim options based on customer preference.
Test Process : All welds of our tanker are subjected to RT (Radiographic Testing) and leakage tests in
accordance with ISO 17636 standard, and have been successfully approved for compliance with ADR and EN 13094:2008
standards.
Кузов : листы кузова выбраны из стали S235JR толщиной 4,2 мм в соответствии с требованиями к материалам и производству стандарта EN 13094:2008 и сварены с использованием метода роботизированной сварки MIG.
Духовка : тарелки и перегородки спроектированы и изготовлены из стали S235JR толщиной 5,0 мм в соответствии со стандартом EN 13094:2008, полностью отвечая требованиям прочности и герметичности.
Шасси : шасси и вся конструкция транспортного средства получили одобрение типа в соответствии с EU 2018/858 и соответствуют соответствующим международным стандартам. Они изготовлены из материалов S355JR толщиной 6,0 мм, S355JR толщиной 8,0 мм и S355JR толщиной 10,0 мм.
Тормозная система : тормозная система спроектирована и испытана в соответствии с правилами ECE R13; он
оснащен электронным управлением тормозами (EBS) и антиблокировочной системой тормозов (ABS) для обеспечения высокой безопасности и
производительности.
Оси : Оси 3x9 тонн, используемые в нашей цистерне, поставляются ведущими в отрасли брендами, такими как Saf
Holland, BPW и Sertel, что обеспечивает безопасную транспортировку в полном соответствии с требованиями EN 13094:2008 и ADR.
Электрическая система : Все системы освещения и сигнализации выбираются в соответствии с правилами UN ECE R48.
Шины и диски : Размер шин, используемых в наших цистернах, составляет 385/65 R 22.5, и они доступны с алюминиевыми или
стальными дисками в зависимости от предпочтений клиента.
Процесс испытаний : Все сварные швы нашего танкера подвергаются радиографическому контролю и испытаниям на герметичность в соответствии со стандартом ISO 17636 и успешно прошли сертификацию на соответствие стандартам ADR и EN 13094:2008.
Gövde : Gövde sacları EN 13094:2008 standardının malzeme ve üretim gerekliliklerine uygun olarak 4,2 mm S235JR olarak seçilmiş ve robotik MIG kaynak yöntemi kullanılarak kaynaklanmıştır.
Bombe : Bombeler ve deflektörler EN 13094:2008 standardına uygun olarak 5,0 mm S235JR olarak tasarlanmış ve üretilmiştir, mukavemet ve sızdırmazlık gerekliliklerini tam olarak karşılamaktadır.
Şasi : Şasi ve tüm araç yapısı AB 2018/858 uyarınca tip onayı almış olup ilgili uluslararası standartlara uygundur. 6,0 mm S355JR, 8,0 mm S355JR ve 10,0 mm S355JR malzemelerden üretilmiştir.
Fren Sistemi : Fren sistemi ECE R13 yönetmeliklerine uygun olarak tasarlanmış ve test edilmiştir; Yüksek güvenlik ve performans sağlamak için elektronik fren kontrolü (EBS) ve kilitlenme önleyici fren sistemi (ABS) ile donatılmıştır.
Akslar : Tankerimizde kullanılan 3x9 tonluk akslar, Saf Holland, BPW ve Sertel gibi sektör lideri markalardan temin edilmekte olup, EN 13094:2008 ve ADR gerekliliklerine tam uyum sağlayarak güvenli taşımayı garanti altına almaktadır.
Elektrik Sistemi : Tüm aydınlatma ve sinyalizasyon sistemleri UN ECE R48 yönetmeliklerine uygun olarak seçilmiştir.
Lastikler ve Jantlar : Tankerlerimizde kullanılan lastik ebadı 385/65 R 22.5 olup, müşteri tercihine göre alüminyum veya çelik jant seçenekleriyle sunulmaktadır.
Test Süreci : Tankerimizin tüm kaynakları ISO 17636 standardına uygun olarak RT (Radyografik Test) ve sızdırmazlık testlerine tabi tutulmuş olup, ADR ve EN 13094:2008 standartlarına uygunluğu başarıyla onaylanmıştır.